Detailed notes and solved problems on the concentration of a solution from the NCERT Exploration textbook for Class 9 Science. Topics covered: definition of concentration, mass by mass percentage (% m/m), mass by volume percentage (% m/v), volume by volume percentage (% v/v), NCERT worked examples 5.1–5.3, comparison table, important distinctions, and graded practice numericals. Aligned with CBSE syllabus 2026-27.
Think about two glasses of lemonade — one prepared with a full spoon of sugar and the other with just a pinch. Both are solutions of sugar in lemon juice, but they taste very different. The difference lies in their concentration.
The concentration of a solution is the amount of solute dissolved in a given amount of solvent or solution. It tells us how much of the solute is present relative to the total solution.
Understanding concentration is not just a classroom exercise — it is essential in real life:
Oral Rehydration Solution (ORS) requires exact amounts of salt and sugar dissolved in a fixed volume of water. Too little solute: ineffective. Too much: harmful, worsens dehydration. Only the right concentration works.
Farmers must mix the right amount of pesticide with a fixed amount of water. Too little: crops remain unprotected. Too much: damages crops, pollutes soil, harms environment. Concentration determines effectiveness and safety.
Other everyday examples where concentration is critical: medicine dosages (e.g., 0.9% saline drip in hospitals), swimming pool disinfectants, food preservatives, fertiliser sprays, and even the flavour of your cup of tea!
In practice, it is not always convenient to measure both the mass of the solute and the mass of the solution. Sometimes it is easier to measure the volume of a liquid rather than weigh it. The three methods — % m/m, % m/v, and % v/v — are used depending on the situation:
| Method | Best Used When… | Typical Application |
|---|---|---|
| % m/m (or % w/w) | Both solute and solvent are solids, or a solid dissolves in a liquid and mass is easier to measure | Packaged food labels (salt, sugar, protein content), milk powder, spice mixtures, alloys |
| % m/v (or % w/v) | The solvent is a liquid and volume is easier to measure than mass; solute is a solid or liquid | Medicines (glucose IV, saline drip), laboratory solutions, pharmaceutical formulations |
| % v/v | Both solute and solvent are liquids (miscible liquids) and volumes are easy to measure | Perfumes, cosmetics, vinegar (5% v/v acetic acid), alcohol solutions, disinfectants |
Fig. 5.4 (NCERT Exploration): Commercial products showing different methods of expressing concentration — (a) milk powder label uses % m/m, (b) glucose solution for IV drip uses % m/v, (c) vinegar uses % v/v for acetic acid content.
Mass by mass percentage (% m/m) tells us how many grams of solute are present in 100 grams of the total solution. The denominator is always the mass of the entire solution — which equals the mass of the solute plus the mass of the solvent.
Formula 5.1 — Mass by Mass Percentage
$$\% \ m/m = \dfrac{\text{Mass of solute (g)}}{\text{Mass of solution (g)}} \times 100$$where: Mass of solution = Mass of solute + Mass of solvent
In industry, the term % w/w (weight by weight) is commonly used instead of % m/m. Numerically, % w/w and % m/m are identical, because weight and mass are used interchangeably in everyday practice. The NCERT textbook uses % m/m; both forms are acceptable in exams.
Given:
Step 1 — Find mass of solution:
Mass of solution = Mass of solute + Mass of solvent = 10 + 90 = 100 g
Step 2 — Apply formula:
$\% \ m/m = \dfrac{\text{Mass of solute}}{\text{Mass of solution}} \times 100 = \dfrac{10}{100} \times 100$
% m/m = 10%
Meaning: 100 g of this salt solution contains 10 g of salt and 90 g of water.
Given:
Rearranging the formula:
$\text{Mass of solute} = \dfrac{\% \ m/m}{100} \times \text{Mass of solution} = \dfrac{4}{100} \times 300$
Mass of zinc oxide = 12 g
Meaning: 300 g of this talcum powder contains 12 g of zinc oxide.
Mass by volume percentage (% m/v) tells us how many grams of solute are present in 100 mL of the total solution. This method is widely used in medicine and laboratories, where it is convenient to measure the volume of a liquid rather than weigh it.
Formula 5.2 — Mass by Volume Percentage
$$\% \ m/v = \dfrac{\text{Mass of solute (g)}}{\text{Volume of solution (mL)}} \times 100$$Note: The denominator is the volume of the final solution, not the volume of solvent added.
A saline drip in hospitals is 0.9% m/v sodium chloride in water — meaning 0.9 g of NaCl is dissolved in water to make 100 mL of solution. This concentration is isotonic — it matches the electrolyte concentration of blood plasma, making it safe to inject directly into the bloodstream. It effectively replaces lost fluids without damaging red blood cells through osmosis.
Fig. 5.4b & 5.5 (NCERT Exploration): Glucose IV solution (5% m/v) and hospital saline drip (0.9% m/v NaCl) — two important real-life applications of mass by volume percentage in medicine.
Given:
Apply formula:
$\% \ m/v = \dfrac{\text{Mass of solute (g)}}{\text{Volume of solution (mL)}} \times 100 = \dfrac{5}{100} \times 100$
% m/v = 5%
Meaning: Every 100 mL of this glucose solution contains 5 g of glucose. This is equivalent to a standard 5% glucose IV solution used in hospitals.
Volume by volume percentage (% v/v) tells us how many mL of solute are present in 100 mL of the total solution. This method is used when both the solute and solvent are liquids (miscible liquids), since measuring volumes is simpler than weighing liquids.
Formula 5.3 — Volume by Volume Percentage
$$\% \ v/v = \dfrac{\text{Volume of solute (mL)}}{\text{Volume of solution (mL)}} \times 100$$Given:
Apply formula:
$\% \ v/v = \dfrac{\text{Volume of solute (mL)}}{\text{Volume of solution (mL)}} \times 100 = \dfrac{1}{100} \times 100$
% v/v = 1%
Meaning: Every 100 mL of the pesticide spray contains 1 mL of the concentrated pesticide. Applying at this concentration protects crops without causing damage.
Given:
Apply formula:
$\% \ v/v = \dfrac{30}{150} \times 100$
% v/v = 20%
Meaning: The prepared juice contains 20% concentrate by volume — i.e., 20 mL of concentrate in every 100 mL of juice.
| Feature | % m/m (or % w/w) | % m/v (or % w/v) | % v/v |
|---|---|---|---|
| Full name | Mass by mass percentage | Mass by volume percentage | Volume by volume percentage |
| Numerator | Mass of solute (g) | Mass of solute (g) | Volume of solute (mL) |
| Denominator | Mass of solution (g) | Volume of solution (mL) | Volume of solution (mL) |
| Unit of solute measured | Grams (g) | Grams (g) | Millilitres (mL) |
| Best used for | Solid-solid or solid-in-liquid mixtures where mass is easy to measure | Medicines, labs — solid dissolved in liquid, volume of solution measured | Two miscible liquids — volume of each component is measured |
| NCERT example | 10 g salt in 100 g solution → 10% m/m | 5 g glucose in 100 mL solution → 5% m/v | 1 mL pesticide in 100 mL spray → 1% v/v |
| Real-life application | Food labels (milk powder, packaged snacks), alloy composition | Glucose IV (5% m/v), hospital saline drip (0.9% m/v) | Vinegar (5% v/v acetic acid), surgical spirit (70% v/v ethanol), perfumes |
| Industry alternate notation | % w/w | % w/v | % v/v (same) |
This is an application-type problem from the NCERT "Pause and Ponder" section that tests conceptual understanding of % v/v.
Understanding the problem:
Using the % v/v formula:
$\% \ v/v = \dfrac{\text{Volume of acetic acid (mL)}}{\text{Volume of solution (mL)}} \times 100$
For 5% v/v vinegar, in 100 mL of the final solution:
$5 = \dfrac{V_{\text{acetic acid}}}{100} \times 100 \quad \Rightarrow \quad V_{\text{acetic acid}} = 5 \text{ mL}$
Procedure to make 100 mL of vinegar:
Important note: The denominator in % v/v is the volume of the final solution (100 mL), not the volume of water added (95 mL). Always make up to the final volume, not just add that amount of water.
A very common mistake is to use the mass of the solvent in the denominator when calculating % m/m. This is incorrect.
WRONG: ❌
10 g salt in 90 g water:
$\% \ m/m = \frac{10}{90} \times 100 = 11.1\%$ ← This uses mass of solvent only.
CORRECT: ✓
10 g salt in 90 g water (solution = 100 g):
$\% \ m/m = \frac{10}{100} \times 100 = 10\%$ ← This uses mass of solution.
Rule: Mass of solution = Mass of solute + Mass of solvent. Always add them first.
When preparing a % m/v solution in a laboratory, you do not add a fixed volume of water and then measure. Instead, you dissolve the solute and then make up the final volume to the required amount using a volumetric flask.
Example: To prepare 250 mL of 5% m/v glucose solution, you dissolve 12.5 g of glucose and add water to make the total volume exactly 250 mL. The denominator is 250 mL (final solution volume), not the volume of water you poured in.
$\% \ m/v = \dfrac{12.5 \text{ g}}{250 \text{ mL}} \times 100 = 5\% \ m/v$ ✓
% m/m, % m/v, and % v/v are three different quantities. For the same solution, the numerical values from each formula will generally be different. For example:
Given: Mass of solute (sugar) = 20 g; Mass of solvent (water) = 80 g
Step 1: Mass of solution = 20 + 80 = 100 g
Step 2:
$\% \ m/m = \dfrac{20}{100} \times 100 = \mathbf{20\%}$
Answer: The mass by mass percentage of the sugar solution is 20% m/m. This means 100 g of this solution contains 20 g of sugar and 80 g of water.
Given: Mass of solute (NaOH) = 4 g; Volume of solution = 200 mL
Apply formula:
$\% \ m/v = \dfrac{4}{200} \times 100 = \mathbf{2\%}$
Answer: The mass by volume percentage is 2% m/v. This means every 100 mL of this solution contains 2 g of NaOH.
Given: Volume of solute (ethanol) = 10 mL; Volume of solution = 50 mL
Apply formula:
$\% \ v/v = \dfrac{10}{50} \times 100 = \mathbf{20\%}$
Answer: The volume by volume percentage is 20% v/v. Every 100 mL of this solution contains 20 mL of ethanol.
Given: Mass of solute (NaCl) = 25 g; Volume of solution = 500 mL
Apply formula:
$\% \ m/v = \dfrac{25}{500} \times 100 = \mathbf{5\%}$
Answer: The mass by volume percentage is 5% m/v. This is similar to a standard saline solution used in many lab experiments.
Given: % m/m of copper in brass = 70%; Total mass of brass = 120 g
Mass of copper:
$\text{Mass of copper} = \dfrac{70}{100} \times 120 = \mathbf{84 \text{ g}}$
Mass of zinc:
Mass of zinc = Total mass − Mass of copper = 120 − 84 = 36 g
Answer: 120 g of brass contains 84 g of copper and 36 g of zinc.
(Zinc percentage = 36/120 × 100 = 30% m/m — confirms copper + zinc = 70% + 30% = 100%)
Given: All components are solids. Total mass of the dry mixture = 75 + 420 + 5 = 500 g
Since all components are solids, % m/m (mass by mass percentage) is appropriate.
% m/m of sugar:
$\% \ m/m = \dfrac{75}{500} \times 100 = \mathbf{15\%}$
% m/m of flour:
$\% \ m/m = \dfrac{420}{500} \times 100 = \mathbf{84\%}$
% m/m of sodium hydrogencarbonate (baking soda):
$\% \ m/m = \dfrac{5}{500} \times 100 = \mathbf{1\%}$
Check: 15 + 84 + 1 = 100% ✓
Given: % m/v = 10%; Volume of solution = 250 mL; find mass of glucose.
Rearrange the % m/v formula:
$\% \ m/v = \dfrac{\text{Mass of solute}}{\text{Volume of solution}} \times 100$
$\text{Mass of solute} = \dfrac{\% \ m/v \times \text{Volume of solution}}{100} = \dfrac{10 \times 250}{100}$
Mass of glucose = 25 g
Answer: To prepare 250 mL of a 10% m/v glucose solution, you need to dissolve 25 g of glucose in water and make up the volume to 250 mL using a volumetric flask.
Student A: Mass of sugar = 20 g; Mass of water = 80 g
Mass of solution = 20 + 80 = 100 g
$\% \ m/m = \dfrac{20}{100} \times 100 = \mathbf{20\%}$
Student B: Mass of sugar = 20 g; Mass of water = 100 g
Mass of solution = 20 + 100 = 120 g
$\% \ m/m = \dfrac{20}{120} \times 100 = \mathbf{16.67\%}$
Student C: Mass of sugar = 30 g; Mass of water = 80 g
Mass of solution = 30 + 80 = 110 g
$\% \ m/m = \dfrac{30}{110} \times 100 = \mathbf{27.27\%}$
Summary:
| Student | Sugar (g) | Water (g) | Solution (g) | % m/m |
|---|---|---|---|---|
| A | 20 | 80 | 100 | 20.00% |
| B | 20 | 100 | 120 | 16.67% |
| C | 30 | 80 | 110 | 27.27% |
Most concentrated: Student C (27.27% m/m). Student C dissolved the most sugar relative to the total mass of solution. Student B's solution is least concentrated (16.67%) because the same mass of sugar is dissolved in more water, diluting it further.
Part 1 — Finding mass of antiseptic in 500 mL of 2% m/v solution:
$\text{Mass of antiseptic} = \dfrac{2 \times 500}{100} = \mathbf{10 \text{ g}}$
500 mL of the 2% m/v solution contains 10 g of antiseptic.
Part 2 — Diluting to 1% m/v:
The mass of antiseptic remains the same (10 g) — you are only adding more water to increase the volume. Find the new volume needed for 1% m/v:
$1 = \dfrac{10}{\text{New volume}} \times 100 \quad \Rightarrow \quad \text{New volume} = \dfrac{10 \times 100}{1} = \mathbf{1000 \text{ mL}}$
Answer: Take the 500 mL of 2% m/v solution and add water to make the total volume up to 1000 mL (1 litre). The resulting solution will be 1% m/v.