Complete notes for Chapter 5 from the NCERT Exploration textbook for Class 9 Science. Topics covered: Classification of Mixtures, Solutions, Concentration, Solubility, Crystallization, Distillation, Paper Chromatography, Separating Funnel, Sublimation, Suspensions, Colloids, Tyndall Effect, Centrifugation, Coagulation, and Emulsions. Aligned with CBSE syllabus 2026-27.
Have you ever wondered how sweet, white crystals of sugar are obtained from tall, green sugarcane plants? Or how doctors detect diseases like malaria using just a few drops of blood? Both of these โ and countless other everyday processes โ depend on the science of separating mixtures.
When you stir muddy water, the heavier sand particles gradually settle to the bottom. But milk, no matter how long you leave it, does not separate in the same way. And when sunlight passes through gaps between dense tree leaves, you can see the beam of light because particles in the air scatter it. These observations are all connected to the properties of different types of mixtures.
By the end of this chapter, you will be able to answer all three questions with confidence.
In this chapter, you will explore mixtures in greater depth โ their properties, behaviour, and the various techniques used to separate them. From industrial processes like sugar production and petroleum refining, to life-saving medical tests, the separation of mixtures plays a crucial role in science and daily life.
A mixture is a combination of two or more substances that are not chemically combined. The components of a mixture retain their individual chemical properties, and no chemical reaction takes place during mixing. Mixtures have no fixed composition โ the proportions of their components can vary.
Some common examples of mixtures include:
In a mixture, components retain their individual properties and can be separated by physical methods. In a compound, elements combine chemically in fixed proportions, and physical methods cannot separate them. For example, sugar dissolved in water is a mixture โ evaporation can separate them. But water (HโO) is a compound โ it cannot be separated into hydrogen and oxygen by simple physical means.
Mixtures are broadly classified into two types based on their composition and appearance: homogeneous mixtures and heterogeneous mixtures. Further classification identifies three main types: solutions, colloids, and suspensions.
A homogeneous mixture has a uniform composition throughout. Every part of the mixture is identical to every other part. When you dissolve sugar in water and stir it well, the mixture is equally sweet in the first sip and the last. You cannot distinguish the components by looking at the mixture.
Examples of homogeneous mixtures:
A heterogeneous mixture does not have a uniform composition. Different parts of the mixture may look and behave differently. When sand is stirred into water, the sand particles are clearly visible and they settle over time.
Examples of heterogeneous mixtures:
Fig. 5.1 & 5.2 (NCERT Exploration): Homogeneous mixture (uniform throughout) vs Heterogeneous mixture (non-uniform, settles with time)
Classification of Mixtures
Solutions: Sugar water, salt water, vinegar
Alloys: Brass, bronze, stainless steel
Suspensions: Muddy water, chalk in water
Colloids: Milk, blood, fog, smoke
Key test: Tyndall Effect (light beam visible in colloids/suspensions, not in solutions) ยท Filtration (suspensions leave residue; colloids/solutions do not)
For a detailed comparison with examples and the Tyndall effect test, see โ Homogeneous and Heterogeneous Mixtures
A solution is a homogeneous mixture of two or more substances. It is formed when a solute (the substance that dissolves) is mixed with a solvent (the substance that does the dissolving). In a sugar-water solution, sugar is the solute and water is the solvent.
When a laser beam is passed through three mixtures โ (A) salt and water, (B) chalk powder and water, and (C) milk and water โ you observe that the beam is invisible in A (true solution) but the path of light is clearly visible in B (suspension) and C (colloid, i.e., milk). This is the Tyndall effect.
Fig. 5.3 (NCERT Exploration): Laser beam passes invisibly through salt water (solution), but its path is clearly visible in chalk water (suspension) and milk water (colloid) โ demonstrating the Tyndall Effect
For a detailed study of solutions, their types, and properties, see โ What is a Solution? โ Class 9
The concentration of a solution tells us how much solute is dissolved in a given amount of solvent or solution. Knowing the right concentration is important in everyday life โ from preparing Oral Rehydration Solution (ORS) for dehydration to spraying pesticides on crops at the correct dosage. Too little solute may make a solution ineffective; too much can be harmful.
The concentration of a solution is expressed in three main ways using percentages:
This tells us how many grams of solute are present in 100 grams of the total solution. It is commonly used for labelling food products and solid-in-liquid mixtures.
$$\% \ m/m = \dfrac{\text{Mass of solute}}{\text{Mass of solution}} \times 100$$
Q. If 10 g of salt is dissolved in 90 g of water, calculate the mass by mass percentage of the solution formed.
Solution:
Mass of solute (salt) = 10 g
Mass of solvent (water) = 90 g
Total mass of solution = 10 + 90 = 100 g
$\% \ m/m = \dfrac{10}{100} \times 100 = \mathbf{10\%}$
This tells us how many grams of solute are present in 100 mL of the solution. It is used in medicines and laboratories. For example, a 5% glucose drip means 5 g of glucose in 100 mL of solution.
$$\% \ m/v = \dfrac{\text{Mass of solute (g)}}{\text{Volume of solution (mL)}} \times 100$$
A saline drip in hospitals is usually 0.9% m/v sodium chloride (common salt) in water โ that means 0.9 g of salt in 100 mL of solution. This concentration is safe for blood and helps replace lost fluids in the body.
This tells us how many mL of solute are present in 100 mL of the solution. It is used when two miscible liquids are mixed, such as in perfumes, cosmetics, and vinegar.
$$\% \ v/v = \dfrac{\text{Volume of solute (mL)}}{\text{Volume of solution (mL)}} \times 100$$
Fig. 5.4 (NCERT Exploration): Commercial products showing three ways to express concentration โ (a) milk powder uses % m/m, (b) glucose solution uses % m/v, (c) vinegar uses % v/v
For solved numericals on concentration, see โ Concentration of Solution โ Detailed Notes and Concentration Numericals โ Class 9
The solubility of a substance is the maximum amount of solute that can dissolve in a fixed quantity of solvent (typically 100 mL or 100 g) at a given temperature. A solution that has dissolved the maximum possible amount of solute at a given temperature is called a saturated solution. If less solute has been dissolved, the solution is called an unsaturated solution.
A graph showing how the solubility of a substance changes with temperature is called a solubility curve. From Activity 5.2 in NCERT, compound 'A' shows a steep increase in solubility with temperature, while compound 'B' also increases but at a different rate. Understanding solubility curves is key to the technique of crystallization.
Fig. 5.6 (NCERT Exploration, Activity 5.2): Solubility curves showing how the solubility of two compounds A and B varies with temperature. Compound A dissolves more per 100 g water at higher temperatures.
Practical significance: The fact that solubility changes with temperature is the scientific basis of crystallization โ a hot, saturated solution cooled slowly will cause the dissolved solid to crystallize out in its pure form.
For detailed study of solubility, saturated solutions, and solubility curves, see โ Solubility โ Class 9 Science and Activity 5.2: Solubility Curves
Separating the components of a homogeneous mixture is more challenging than separating heterogeneous mixtures because the components are uniformly distributed. Three main techniques are used: crystallization, distillation, and paper chromatography.
Crystallization is the process of obtaining a pure solid substance from a saturated solution by cooling the solution slowly. When a hot, saturated solution is cooled, the solute becomes less soluble and separates out as pure, geometrically shaped solids called crystals.
Principle: The solubility of a solid solute in a liquid solvent decreases as temperature falls. Excess solute that can no longer remain dissolved separates out as pure crystals.
Uses of crystallization:
Fig. 5.7 & 5.8 (NCERT Exploration): (Left) Natural crystals โ rock salt, candy sugar (mishri), frost. (Right) Steps in laboratory crystallization: preparing the saturated solution, filtering the hot solution, cooling slowly, and collecting blue copper sulfate crystals.
Crystallization of salt was an ancient process used by coastal communities in India. Panga salt was obtained by boiling concentrated sea brines, while evaporation of seawater produced karkatch salt. Salt crystals of different sizes were produced by these traditional methods. For more, see โ India's Scientific Contributions: Salt and Distillation
For step-by-step crystallization procedure, Activity 5.3, and practice questions, see โ Crystallization โ Class 9 ยท Activity 5.3: Crystallization of Copper Sulfate
Distillation is the process of separating two miscible liquids (or a liquid from a dissolved solid) by exploiting their different boiling points. The mixture is heated until the liquid with the lower boiling point vaporises. The vapour passes through a condenser where it cools and condenses back into a liquid, which is collected separately.
Condition for simple distillation: The boiling points of the two liquids must differ by at least about 25 ยฐC.
Example: Separating acetone (boiling point 56 ยฐC) and water (boiling point 100 ยฐC). When the mixture is heated, acetone vaporises first and is collected as a pure distillate, while water remains in the flask.
Fig. 5.11 & 5.12 (NCERT Exploration): Distillation process (left) and complete laboratory set-up (right) for separating acetoneโwater mixture: distillation flask, thermometer, condenser with water inlet/outlet, and collection flask.
When two miscible liquids have similar boiling points (difference less than 25 ยฐC), simple distillation cannot effectively separate them. Fractional distillation uses a fractionating column to achieve multiple vaporisationโcondensation steps. The most important industrial application is the refining of crude petroleum โ separating it into petroleum gas, petrol, kerosene, diesel, lubricating oil, and bitumen.
Fig. 5.14 (NCERT Exploration): (a) A petroleum refinery; (b) Products of fractional distillation of crude petroleum โ from the top: petroleum gas, petrol, aviation fuel (kerosene), diesel, lubricating oil, bitumen.
The process of distillation has been used for centuries in Kannauj, Uttar Pradesh (the perfume capital of India), to extract fragrances from flowers. The traditional Deg-Bhapka method captures the earthy smell of first rain and turns it into a natural perfume called Mitti ka Ittar. This ancient distillation technique has been passed down through generations.
For detailed diagram and worked examples, see โ Distillation โ Class 9 Science
Paper chromatography is a technique used to separate the components of a mixture based on the differences in how fast they move through paper when carried by a solvent. Different components interact differently with the paper and the solvent, causing them to travel at different rates and separate into distinct spots or bands.
Principle: Components that interact more strongly with the paper (stationary phase) move slowly. Those that interact more with the solvent (mobile phase) move faster.
Common applications:
Fig. 5.15 (NCERT Exploration, Activity 5.5): Paper chromatography set-up โ (a) chromatographic paper strip with pencil line, (b) ink spot marked at centre, (c) strip dipped in water below the spot; as water rises, different ink pigments separate.
The word chromatography comes from the Greek words chroma (colour) and graphein (to write). It literally means "writing with colour" because it was originally used to separate coloured substances like dyes and inks.
For the step-by-step procedure and Activity 5.5, see โ Paper Chromatography โ Class 9 ยท Activity 5.5: Paper Chromatography with Ink
Heterogeneous mixtures are generally easier to separate than homogeneous ones because the components are physically distinct. Different techniques are used depending on the nature of the mixture โ whether it involves immiscible liquids, sublimable solids, colloidal particles, and so on.
When two liquids do not mix with each other, they are called immiscible liquids. Oil and water are a classic example โ they form two separate layers because of their different densities. A separating funnel is used to separate such liquids.
Principle: The denser liquid sinks to the bottom and can be drained off through the stopcock, while the lighter liquid remains on top.
Example (Activity 5.6 from NCERT): A mixture of mustard oil and water is poured into a separating funnel. Mustard oil (less dense) forms the upper yellow layer; water (denser) forms the lower layer. The stopcock is opened to drain the water layer first into a separate container.
Fig. 5.16 (NCERT Exploration, Activity 5.6): Separating funnel showing mustard oil (upper yellow layer) over water (lower layer). Water is drained off through the stopcock first.
For detailed procedure and more examples, see โ Separating Funnel โ Immiscible Liquids ยท Activity 5.6: Separating Funnel with Mustard Oil
Sublimation is the process by which a solid directly converts into vapour (gas) upon heating, without passing through the liquid state. The reverse process โ when vapour cools and converts directly back into solid โ is called deposition.
Used to separate: A mixture containing one sublimable component and one non-sublimable component.
Examples of sublimable substances: Camphor, naphthalene, ammonium chloride (NHโCl), iodine, solid carbon dioxide (dry ice)
Activity 5.7 (NCERT): A mixture of camphor and sand is placed in a china dish. When heated, camphor sublimes and the vapour collects as white solid deposits on the inner wall of an inverted funnel. Sand remains in the china dish. The two are completely separated.
Fig. 5.17 (NCERT Exploration, Activity 5.7): Sublimation apparatus โ burner heats china dish containing camphor-sand mixture; camphor vapour rises and deposits as white solid on inner walls of the inverted funnel; sand remains behind.
For more on sublimation vs evaporation and worked examples, see โ Sublimation โ Class 9 Science ยท Activity 5.7: Sublimation of Camphor
An alloy is a homogeneous mixture of two or more metals, or a metal and a non-metal. Alloys are formed when metals are melted at high temperatures and mixed. Physical methods cannot separate the components of an alloy once it has solidified. Common examples:
A suspension is a heterogeneous mixture in which undissolved solid particles (larger than 1000 nm) remain suspended throughout a liquid medium. The particles are visible to the naked eye and settle on standing.
Examples: Muddy water, chalk powder in water, sawdust in water, tea leaves in water.
Properties: Settles on standing; particles visible to naked eye; can be separated by filtration; shows Tyndall effect (light path visible).
Centrifugation is a technique that uses rapid spinning to separate heavier particles from a liquid. A mixture is placed in tubes inside a centrifuge machine that spins at high speed. The centrifugal force (the outward force acting on a body in circular motion) causes the heavier, denser particles to move outward and settle at the bottom of the tubes, while the lighter liquid remains on top.
Applications:
Fig. 5.19 & 5.22 (NCERT Exploration): Centrifugation machine (outer and inner view); blood sample before centrifugation (mixed) and after centrifugation (separated into red blood cells, platelets/white blood cells, and plasma layers).
A paperfuge is a low-cost, hand-powered centrifuge made from cardboard and string โ inspired by a common spinning toy. By spinning blood samples at very high speed, it can separate blood components without electricity. This simple tool helps detect diseases like malaria and anaemia in remote areas where power supply may be unavailable.
Coagulation is a process in which a substance called a coagulant is added to a suspension to make fine, dispersed particles clump together (aggregate) into larger masses. These larger clumps then settle by gravity (sedimentation) and can be removed by decantation or filtration.
Example from NCERT: Adding powdered alum (fitkari) to muddy water. The alum coagulates the fine clay particles, which clump together and settle at the bottom, leaving clearer water above.
Everyday examples of coagulation:
Fig. 5.21 (NCERT Exploration): Coagulation process โ (a) adding powdered alum to muddy water; (b) alum coagulates the suspended impurities; (c) impurities settle at the bottom, leaving clearer water.
For detailed notes with examples, see โ Centrifugation ยท Coagulation
A colloid is a type of mixture where the dispersed particles are of an intermediate size โ between 1 nm and 1000 nm in diameter. Colloid particles are too small to be seen with the naked eye, yet too large to dissolve completely like a true solution. They do not settle on standing, unlike suspensions.
Examples of colloids: Milk, blood, fog, smoke, tomato sauce, ice cream, starch solution, ink, butter, body lotion.
The two components of a colloid are:
Some colloids have both the dispersed phase and the dispersion medium as liquids. These are called emulsions. Emulsions are further classified as:
Emulsions are stabilised by emulsifying agents (emulsifiers). For example, proteins in milk and butter act as emulsifying agents. Some medicines are prepared as emulsions to make them more palatable and easier to take.
Fig. 5.23 (NCERT Exploration): Visual comparison of (a) Solution โ small particles, transparent, no Tyndall effect; (b) Suspension โ large visible particles, settles; (c) Colloid โ medium-sized particles, apparently uniform but shows Tyndall effect.
For detailed notes on colloids, emulsions, and dispersion systems, see โ Colloids โ Class 9 Science ยท Emulsions โ Class 9 Science
The Tyndall effect is the scattering of a beam of light by the particles in a colloid or suspension, making the path of the light beam visible. It was first explained by the scientist John Tyndall. A true solution does not show the Tyndall effect because its particles (less than 1 nm) are too small to scatter light.
How to observe the Tyndall effect:
Fig. 5.24 (NCERT Exploration): Tyndall effect in a sports stadium โ the paths of floodlights are visible as bright beams because dust and moisture particles in the air scatter the light.
For detailed explanation with examples and common exam questions, see โ Tyndall Effect โ Class 9 Science
| Method | Type of Mixture | Principle Used | Example |
|---|---|---|---|
| Crystallization | Homogeneous (solid dissolved in liquid) | Difference in solubility at different temperatures | Salt from seawater; purifying copper sulfate |
| Distillation | Homogeneous (two miscible liquids, boiling point difference โฅ 25 ยฐC) | Difference in boiling points | Acetone (56 ยฐC) from water (100 ยฐC) |
| Fractional Distillation | Homogeneous (two miscible liquids, boiling point difference < 25 ยฐC) | Difference in boiling points (repeated condensation) | Petroleum fractions from crude oil |
| Paper Chromatography | Homogeneous (dissolved solids with different mobilities) | Differential movement of components on paper with solvent | Pigments from ink; plant leaf pigments |
| Separating Funnel | Heterogeneous (two immiscible liquids) | Difference in density (immiscibility) | Mustard oil separated from water |
| Sublimation | Heterogeneous (sublimable solid mixed with non-sublimable solid) | One component converts directly from solid to vapour on heating | Camphor from camphor-sand mixture |
| Centrifugation | Heterogeneous (solid in liquid, or two liquids of different densities) | Centrifugal force separates particles by density | Blood components (plasma, RBCs, WBCs) |
| Coagulation | Heterogeneous (fine colloidal/suspended particles in liquid) | Coagulant causes fine particles to clump and settle | Alum added to muddy water; paneer from milk |
| Property | Solution | Colloid | Suspension |
|---|---|---|---|
| Nature | Homogeneous | Apparently homogeneous | Heterogeneous |
| Particle size | Less than 1 nm | 1 โ 1000 nm | More than 1000 nm |
| Visible to naked eye? | No | No | Yes |
| Settles on standing? | No | No | Yes |
| Tyndall effect? | No | Yes | Yes |
| Separated by filtration? | No | No (requires special membrane) | Yes |
| Examples | Salt water, sugar water, copper sulfate solution, vinegar | Milk, blood, fog, smoke, starch solution, butter | Muddy water, chalk in water, sand in water |