Complete notes on the separating funnel for Class 9 from the NCERT Exploration textbook. Topics covered: immiscible vs miscible liquids, why two liquids form separate layers, labelled separating funnel apparatus, Activity 5.6 (mustard oil and water), the middle interface layer, real-world applications, and NCERT Q5 solved. Aligned with CBSE syllabus 2026-27.
Before understanding the separating funnel, you need to be clear on the difference between miscible and immiscible liquids — because the separating funnel only works for one of these types.
| Feature | Miscible Liquids | Immiscible Liquids |
|---|---|---|
| Definition | Liquids that mix completely in all proportions to form a single homogeneous layer | Liquids that do not mix — they remain as two distinct separate layers |
| Examples | Alcohol + water; acetone + water; vinegar + water | Mustard oil + water; kerosene + water; petrol + water |
| How to separate? | Distillation (if boiling points differ sufficiently) | Separating funnel — the method on this page |
Immiscibility comes down to the nature of the molecules and their intermolecular forces. Water is a polar molecule — its molecules attract each other through strong hydrogen bonds. Oil (like mustard oil) is non-polar — its molecules interact through much weaker van der Waals forces. When you try to mix oil and water, water molecules attract each other far more strongly than they attract oil molecules. The water molecules essentially push the oil molecules away, keeping them separate. This is why "oil and water don't mix."
A useful way to remember this is the chemist's rule: "like dissolves like" — polar liquids mix with polar liquids; non-polar liquids mix with non-polar liquids. Mixing a polar liquid with a non-polar one results in immiscibility.
The Science Behind LayersWhen two immiscible liquids are placed together, they form separate layers — but which liquid goes on top and which goes on bottom? The answer is density.
The denser liquid sinks to the bottom; the less dense liquid floats on top. This is the same principle that makes ice float on water or makes a wooden block float on a lake.
For the mustard oil and water example from the NCERT textbook:
You can observe this immediately when you pour mustard oil into water — the oil floats on top, forming a visible yellow layer, while the water stays below.
The NCERT textbook raises this question in a "What if?" box: if two immiscible liquids have exactly the same density, they would not form distinct, stable layers — the interface between them would be indeterminate and the liquids would float randomly relative to each other without settling. In practice, this situation is very rare because virtually no two different liquids have exactly the same density.
The separating funnel is a specialised piece of glassware designed specifically for separating two immiscible liquid layers. The NCERT textbook shows a labelled diagram in Fig. 5.16.
Fig. 5.16 (NCERT Exploration): Separating funnel set-up for separating mustard oil from water
| Component | Description and Role |
|---|---|
| Glass Bulb (Funnel Body) | The wide, pear-shaped or cylindrical glass body that holds the mixture of two liquids while they separate into layers. |
| Glass Stopper | Seals the top of the funnel. Removed when adding the liquid mixture or when pressure needs to be equalised during draining. |
| Stopcock (Tap) | The most important part — a glass or PTFE valve at the narrow bottom of the funnel. Opening the stopcock allows liquid to drain out; closing it stops the flow. Controls exactly how much liquid is released. |
| Narrow Stem / Nozzle | The thin tube below the stopcock through which the lower liquid drains into the receiving flask. |
| Laboratory Stand with Ring | Holds the separating funnel in a vertical, stationary position — essential for allowing the layers to form and drain cleanly. |
| Conical Flask | Placed below the separating funnel to collect the lower liquid as it drains out through the stopcock. |
In Activity 5.6, the NCERT Exploration textbook demonstrates the use of a separating funnel by separating a mixture of mustard oil and water. Mustard oil (density ≈ 0.91 g/mL) is less dense than water (1.0 g/mL) and is immiscible with it — so the two liquids form distinct layers when left to stand. The separating funnel allows the denser lower layer (water) to be drained out through the stopcock while the less dense upper layer (mustard oil) remains in the funnel and is collected separately.
NCERT Exploration Activity 5.6: Mustard oil (upper, yellow layer) and water (lower layer) separated using a separating funnel
👉 For the complete step-by-step procedure, materials list, observations, safety precautions, and extension experiments for Activity 5.6, visit the dedicated page:
Activity 5.6 — Separating Funnel: Mustard Oil and Water (Full Experiment) →
At the boundary between the two immiscible liquid layers, there is always a thin region where both liquids are intermixed — the interface layer. This thin zone contains a blend of both oil and water molecules and cannot be considered either pure oil or pure water.
When separating the two layers using the stopcock, this interface portion is collected separately and discarded rather than added to either of the two product fractions. Discarding the interface improves the purity of both the water fraction and the oil fraction. In industrial separations, this intermediate fraction may be re-processed to recover as much of each component as possible.
Kerosene (density ≈ 0.80 g/mL) is immiscible with and less dense than water. A separating funnel will produce a clean kerosene upper layer and a water lower layer, allowing both to be collected separately.
When petroleum products are accidentally spilled into water bodies, the oil floats on the water surface because petroleum is less dense than water and is immiscible with it. The principle of separating immiscible liquids is applied on an industrial scale to collect and remove oil from water during spill cleanup operations — though mechanical booms and skimmers are used rather than a glass separating funnel.
In chemistry laboratories, the separating funnel is used for a technique called solvent extraction (also called liquid-liquid extraction). A compound dissolved in water can often be extracted into an organic solvent (like ethyl acetate or dichloromethane) that is immiscible with water. The compound transfers preferentially into the organic layer, which can then be separated using the separating funnel and evaporated to give the pure compound. This is a fundamental technique in organic chemistry and pharmaceutical preparation.
Beyond LiquidsThe separating funnel works specifically for liquid-liquid immiscible mixtures. But what about mixtures that involve gases?
Smoke can be separated by filtration or electrostatic precipitators; fog droplets settle or can be filtered through fine materials. Each type of mixture requires a method suited to its specific properties.
NCERT Solved ExampleNCERT Q5: The label on a cooking oil pack says one litre (910 g). If this oil is mixed with water, will it form a separate layer? If so, which substance will be on top? How will you separate the two layers? Also, draw the diagram of the apparatus used.
Step 1 — Will it form a separate layer?
Yes. Cooking oil is non-polar and water is polar — they are immiscible. When mixed, they will form two separate layers.
Step 2 — Which layer is on top?
Calculate the density of cooking oil: density = mass ÷ volume = 910 g ÷ 1000 mL = 0.91 g/mL. Since 0.91 g/mL < 1.0 g/mL (density of water), the cooking oil is less dense. Therefore, cooking oil will be the upper layer and water will be the lower layer.
Step 3 — How to separate?
Use a separating funnel. Pour the mixture into the separating funnel and allow it to stand until two distinct layers form. Open the stopcock slowly to drain the lower layer (water) into a conical flask. Close the stopcock just before the interface layer begins to drain. Collect the upper layer (cooking oil) separately.
Diagram: Draw and label — Separating funnel (containing oil on top, water below), Glass stopper (top), Stopcock (bottom of funnel), Laboratory stand with ring (holding the funnel), Conical flask (below, collecting water). Refer to Fig. 5.16 in NCERT Exploration.
Q1. Define immiscible liquids. Give two examples.
Immiscible liquids are liquids that do not mix with each other and form two distinct separate layers when placed together, because their intermolecular forces are incompatible. Examples: (1) Mustard oil and water — oil is non-polar, water is polar. (2) Kerosene and water — kerosene is non-polar, water is polar.
Q2. In the separating funnel, which liquid is drained out first — the upper or the lower layer? Why?
The lower layer is drained out first. The stopcock is at the bottom of the separating funnel, so gravity causes the lower (denser) layer to drain through the stopcock when it is opened. The upper (less dense) layer remains in the funnel and is collected later from the top of the funnel into a separate container.
Q3. Can a separating funnel be used to separate acetone and water? Why or why not? What method would you use instead?
No, a separating funnel cannot be used to separate acetone and water. Acetone and water are miscible liquids — they mix completely and form a single homogeneous layer. A separating funnel only works for immiscible liquids that form two distinct layers. Since acetone (b.p. 56 °C) and water (b.p. 100 °C) have a boiling point difference of 44 °C (well above the required 25 °C), they should be separated by distillation.
Q4 (Application). A mixture of two liquids P and Q is poured into a separating funnel. After standing, P forms the lower layer and Q forms the upper layer. What can you conclude about the relative densities of P and Q? How would you collect each liquid separately?
Conclusion about densities: P is denser than Q (density of P > density of Q), because the denser liquid always sinks to the bottom.
To collect each liquid: Open the stopcock slowly and drain the lower layer (P) into a conical flask. Close the stopcock just as the interface between P and Q begins to approach — discard the small interface portion. Then collect Q from the top of the funnel by opening the top of the funnel and pouring it into a separate container, or by continuing to open the stopcock carefully after all of P and the interface have been removed.
Q5 (Application). Why is the glass stopper at the top of the separating funnel removed before opening the stopcock at the bottom?
The glass stopper must be removed (or turned to the open position) before opening the stopcock at the bottom to allow air to enter from the top. If the top is sealed when the bottom stopcock is opened, a partial vacuum forms inside the funnel as liquid drains out. This vacuum opposes the draining and either slows it to a stop or can cause uneven, jerky flow. With the top open, air can freely enter as liquid drains out, maintaining atmospheric pressure inside the funnel and allowing smooth, controlled drainage.