physicscatalyst.com logo






📚 Class 9 Science | Chapter 5 | Exploration NCERT

Sublimation — Definition, Examples and Separation Technique

Complete notes on sublimation for Class 9 from the NCERT Exploration textbook. Topics covered: definition of sublimation and deposition, phase change diagram, substances that sublime (camphor, iodine, dry ice, naphthalene, ammonium chloride), Activity 5.7 summary (separating camphor from sand), why the technique works, and comparison with evaporation. Aligned with CBSE syllabus 2026-27.

Sublimation: solid → vapour (no liquid stage)
Deposition: vapour → solid (no liquid stage)
Examples: camphor, naphthalene, iodine, dry ice
Used to separate: sublimable + non-sublimable solid

Join PhysicsCatalyst WhatsApp Channel


1. What is Sublimation?

Most substances follow a predictable path when heated: solid → liquid → gas. But some substances skip the liquid stage entirely. When heated, they convert directly from solid to vapour. This process is called sublimation.

Definition (NCERT Exploration)

Sublimation is the process by which a solid changes directly into vapour (gaseous state) without passing through the liquid state, when heated below its melting point.

A substance sublimes when it has a significant vapour pressure even below its melting point — meaning some of its molecules have enough energy to escape from the solid surface directly into the gas phase, without the solid first becoming a liquid. Camphor placed on a table slowly disappears at room temperature even without being heated — this is sublimation happening naturally at room temperature.

2. What is Deposition?

Definition (NCERT Exploration)

Deposition is the reverse of sublimation — the process when vapour cools and changes back into a solid directly, without first becoming a liquid.

In the Activity 5.7 experiment, camphor vapour that rises up the funnel cools when it contacts the cooler walls of the glass funnel. Instead of first condensing into liquid camphor, it deposits directly as solid white camphor crystals on the funnel's inner surface. This is deposition.

Deposition also occurs naturally: frost on windows (water vapour → ice crystals without liquid water forming first) and snowflake formation in clouds are both examples of deposition — as mentioned earlier in the chapter under crystallization.

3. Phase Change Diagram — Normal vs Sublimation Pathway

There are two pathways between the solid and gaseous states:

Normal (Three-Step) Pathway:

Solid ⟶ (melting) ⟶ Liquid ⟶ (vaporisation) ⟶ Gas


Sublimation / Deposition (Direct) Pathway:

Solid ⟶ (sublimation / heating) ⟶ Gas (Vapour) ⟶ (deposition / cooling) ⟶ Solid

The liquid phase is completely bypassed in sublimation and deposition.

The key distinction is that in sublimation, there is no liquid phase involved at any point. The solid goes straight to vapour, and the vapour goes straight back to solid — the liquid state is entirely bypassed.

4. Substances that Sublime — and Substances that Do Not

4.1 Common Substances that Sublime

Substance Common Name / Use Observable Evidence of Sublimation
Camphor Kapur — used in religious rituals, medicines, insect repellents A camphor tablet slowly disappears at room temperature; strong odour spreads without the solid melting
Naphthalene Mothballs — used to repel moths from stored clothes Mothballs in a closed cupboard gradually shrink and disappear over weeks without becoming liquid
Iodine Dark grey-black solid; antiseptic in tincture form When gently heated, iodine crystals produce distinctive purple-violet vapour directly, without melting
Ammonium Chloride NH₄Cl — used in fertilisers and some dry cell batteries Sublimes on heating; used to separate it from salt mixtures (salt does not sublime)
Dry Ice (Solid CO₂) Used in food preservation, theatre fog effects, ice cream storage Dry ice placed in air immediately starts producing white CO₂ vapour; no liquid forms at normal atmospheric pressure

4.2 Substances that Do NOT Sublime

Not all solids sublime. Substances that have very high melting points or very low vapour pressures below their melting points do not sublime under normal laboratory conditions. Examples of non-sublimable substances include common salt (NaCl), sand (SiO₂), iron filings, and sugar. This difference is what makes sublimation useful as a separation technique — if one component sublimes and the other does not, they can be separated cleanly.

5. Activity 5.7 — Separating Camphor from a Camphor + Sand Mixture

In Activity 5.7, the NCERT Exploration textbook demonstrates sublimation as a separation technique by separating a mixture of crushed camphor and sand. Camphor sublimes on gentle heating, its vapour rises and deposits as pure solid camphor crystals on the inner walls of a cooler glass funnel placed over the china dish. Sand, which does not sublime, remains behind in the china dish.

Sublimation apparatus diagram — Activity 5.7 camphor and sand Class 9 Science NCERT

NCERT Exploration Activity 5.7: Sublimation apparatus — china dish with camphor + sand, inverted glass funnel with cotton plug, tripod stand, wire gauze, burner

Key Results from Activity 5.7

  • Observation: On gentle heating, white solid camphor deposits form on the inner walls of the glass funnel. The cotton plug slows the vapour, allowing it to deposit before escaping. Sand remains in the china dish — it does not sublime.
  • Inference: Camphor and sand are separated cleanly — camphor is collected pure on the funnel walls; sand stays in the dish.
  • Role of the cotton plug: Plugging the nozzle of the funnel slows the flow of camphor vapour and prevents it from escaping into the air before it can deposit on the cooler funnel walls.
  • Why gentle heating? Strong heating can cause sand to fly off the dish and also forces vapour out too quickly before it can deposit. Gentle, even heating gives the vapour time to rise slowly and condense on the funnel.

👉 For the complete step-by-step procedure, materials list, full labelled apparatus, safety precautions, detailed observations, and alternative experiments (naphthalene, ammonium chloride), visit the dedicated page:
Activity 5.7 — Sublimation of Camphor (Full Experiment) →

6. Why Sublimation Works as a Separation Technique

Sublimation is an effective separation technique because it exploits a fundamental difference between two components of a mixture:

  • The sublimable component (e.g., camphor) converts to vapour when heated and moves away from the mixture. When the vapour contacts a cooler surface, it deposits as a pure solid — free from the other component it was mixed with.
  • The non-sublimable component (e.g., sand) has no vapour pressure at these temperatures. It simply stays in the dish, unmoved by the heat that drives the camphor away.

The result is a near-perfect separation: the camphor is recovered as pure solid crystals on the funnel, and the sand remains as pure sand in the dish. No solvents are needed, and no chemical reactions take place — it is purely a physical separation based on the difference in the tendency to sublime.


Join PhysicsCatalyst WhatsApp Channel


7. Dry Ice — Sublimation You Have Probably Seen

Dry ice is the solid form of carbon dioxide (CO₂). Unlike ordinary water ice, dry ice does not melt into a liquid at normal atmospheric pressure — it sublimes directly from solid to gas. This is why it is called "dry" ice: it disappears without any liquid mess.

Key Facts about Dry Ice

  • Sublimation temperature at normal pressure: −78.5 °C (much colder than ordinary ice at 0 °C)
  • At atmospheric pressure, CO₂ has no stable liquid phase — it sublimes directly.
  • The "fog" or "smoke" effect seen with dry ice is not the CO₂ gas itself (which is colourless) but tiny water droplets from the surrounding air condensed by the extreme cold.
  • Uses: preserving food during transport, creating fog effects in theatre and photography, keeping ice cream solid without refrigeration, and chilling in medical applications.

Safety Note

Dry ice must never be touched with bare hands — at −78.5 °C, it causes immediate frostbite. It must only be handled with insulated gloves. It must also not be stored in a sealed airtight container, as the CO₂ gas produced by sublimation can build up pressure and cause an explosion.

8. Sublimation vs Evaporation — Key Differences

Students sometimes confuse sublimation with evaporation because both produce vapour. The table below makes the distinction clear:

Feature Sublimation Evaporation
Starting state of substance Solid Liquid
End state of substance Vapour (gas) Vapour (gas)
Is the liquid phase involved? No — bypassed entirely Yes — the liquid is the starting phase
Temperature condition Below the melting point of the substance Below the boiling point of the liquid
Reverse process Deposition (vapour → solid directly) Condensation (vapour → liquid)
Examples Camphor, iodine, dry ice (CO₂), naphthalene, ammonium chloride Water from a wet surface, alcohol from an open bottle, petrol from a container

9. Practice Questions

Q1. Define sublimation. How is it different from evaporation?

Show Answer

Sublimation is the process by which a solid changes directly into vapour without passing through the liquid state, when heated below its melting point. The key difference from evaporation is the starting state: in sublimation, the starting material is a solid; in evaporation, the starting material is a liquid. In sublimation, the liquid phase is completely bypassed; in evaporation, the substance is already in the liquid phase. Reverse of sublimation is deposition (vapour → solid); reverse of evaporation is condensation (vapour → liquid).

Q2. Name four substances that sublime. Also name two substances that do NOT sublime.

Show Answer

Substances that sublime: (1) Camphor (kapur) (2) Naphthalene (mothballs) (3) Iodine (4) Dry ice (solid CO₂) / Ammonium chloride

Substances that do NOT sublime: (1) Common salt (NaCl) (2) Sand (SiO₂)

Q3. In Activity 5.7 (sublimation of camphor), what is the purpose of plugging the nozzle of the glass funnel with cotton?

Show Answer

The cotton plug at the nozzle of the glass funnel serves two purposes. First, it slows the flow of camphor vapour inside the funnel, giving the vapour more time to cool and deposit on the inner walls of the funnel rather than escaping into the air. Second, it prevents camphor crystals deposited on the funnel walls from falling off when the funnel is lifted. Without the cotton plug, much of the camphor vapour would escape before depositing, reducing the yield of pure camphor collected.

Q4. Why is dry ice called "dry"? How does its behaviour demonstrate sublimation?

Show Answer

Dry ice is called "dry" because, unlike ordinary water ice, it does not melt into a liquid. Solid CO₂ (dry ice) at normal atmospheric pressure sublimes directly from solid to gas at −78.5 °C — there is no stable liquid CO₂ phase at atmospheric pressure. When you place dry ice in air, it immediately starts producing CO₂ vapour (which is colourless); the white "fog" you see is actually tiny water droplets from the surrounding humid air that are condensed by the intense cold of the dry ice. Since no liquid water is produced (the CO₂ goes directly from solid to gas), the surface underneath the dry ice stays dry — hence the name.

Q5 (Identify the method). A mixture contains naphthalene and common salt. How would you separate them? Name the method and explain why it works.

Show Answer

Method: Sublimation

Procedure: Place the mixture in a china dish. Invert a glass funnel (with a cotton-plugged nozzle) over it. Heat gently. Naphthalene sublimes and its vapour rises into the funnel, where it cools and deposits as pure white naphthalene crystals on the inner funnel walls. Common salt does not sublime and remains in the china dish.

Why it works: Naphthalene is a substance with significant vapour pressure — it sublimes readily on gentle heating. Common salt (NaCl) has essentially no vapour pressure at these temperatures and does not sublime. This difference in behaviour allows them to be separated cleanly using sublimation.

Q6 (Identify the method). From Table 5.3 in NCERT Q7: How would you separate naphthalene and sand? Give a reason for your choice of method.

Show Answer

Method: Sublimation

Reason: Naphthalene is a sublimable substance — it converts from solid directly to vapour on gentle heating. Sand (SiO₂) is a non-sublimable substance with negligible vapour pressure under normal laboratory conditions — it does not sublime. When the mixture is heated, naphthalene vapour can be collected as pure solid on a cooler surface (such as a funnel), while sand stays in the china dish. This makes sublimation the ideal method for separating this mixture.


Glossary — Key Terms to Remember

Sublimation
The process by which a solid converts directly into vapour without passing through the liquid state, when heated below its melting point.
Deposition
The reverse of sublimation — when vapour cools and converts directly into solid without passing through the liquid state.
Vapour Pressure
The pressure exerted by the vapour of a substance in equilibrium with its solid (or liquid) phase; substances with high vapour pressure below their melting points tend to sublime.
Dry Ice
Solid carbon dioxide (CO₂); sublimes at −78.5 °C at atmospheric pressure — no liquid CO₂ forms at normal pressure.
China Dish
A shallow, heat-resistant porcelain dish used as the base in the sublimation apparatus; holds the mixture to be heated.
Camphor (Kapur)
A white, waxy solid with a strong smell; sublimes readily at room temperature; used in religious rituals and as an insect repellent. Used in Activity 5.7.
Naphthalene
A white solid used as mothballs; sublimes at room temperature over time, keeping moths away from stored clothes.

Complete Chapter 5 Resources





Latest Updates
Earth ,Moon and the sun class7 MCQ

Number play class 7 Maths mcq

parallel and intersecting lines class7 MCQ

Life Processes in Plants class 7 MCQ

Life Processes in Animals Class 7 MCQ