Detailed notes on solutions from the NCERT Exploration textbook for Class 9 Science. Topics covered: definition of a solution, solute and solvent, properties of a true solution, types of solutions (by state), aqueous and non-aqueous solutions, dilute and concentrated solutions, and real-life examples including ORS. Aligned with CBSE syllabus 2026-27.
When you dissolve a spoonful of common salt in a glass of water and stir it, the salt completely disappears. The resulting mixture looks clear, tastes salty throughout, and the salt does not settle even after hours. You have made a solution.
A solution is a homogeneous mixture of two or more substances. In a solution, one substance is distributed uniformly throughout the other at the molecular or ionic level. The resulting mixture has a uniform composition throughout — every part of the solution has the same proportion of each component.
A solution is a homogeneous mixture formed when a solute (the substance that dissolves) is completely dissolved in a solvent (the substance that does the dissolving). The particles of the solute are of molecular size (less than 1 nm) and are uniformly distributed throughout the solvent.
Solutions can exist in all three states of matter — solid, liquid, and gas. Air is a solution (gas in gas); seawater is a solution (solid in liquid); brass is a solution (solid in solid). The most familiar solutions are liquids, especially those in which water is the solvent.
Every solution has at least two components:
The solute is the component that gets dissolved. It is usually present in a smaller quantity in the solution.
The solvent is the component that dissolves the solute. It is usually present in a larger quantity in the solution.
When a solid dissolves in a liquid, the solid is the solute and the liquid is the solvent — this is easy. But when two liquids are mixed (e.g., alcohol in water), the convention is: the component present in smaller proportion is the solute, and the one in larger proportion is the solvent. In 70% alcohol solution in water, alcohol (70%) is the solute and water (30%) is… wait — actually here alcohol is more, so alcohol is the solvent and water is the solute? In common lab practice, when water is one of the components, water is traditionally considered the solvent regardless of proportion (this is the aqueous solution convention). For non-aqueous systems, the component in greater quantity is the solvent.
Solutions exist in all three states of matter. The following table gives common examples of solutions, identifying the solute, solvent, and the state of the solution:
| Solution | Solute | Solvent | State of Solution |
|---|---|---|---|
| Salt water | Salt / NaCl (solid) | Water (liquid) | Liquid |
| Sugar water | Sugar (solid) | Water (liquid) | Liquid |
| Aerated drink / Soda | CO₂ (gas) | Water (liquid) | Liquid |
| Vinegar | Acetic acid (liquid) | Water (liquid) | Liquid |
| Tincture of iodine | Iodine (solid) | Alcohol (liquid) | Liquid (non-aqueous) |
| Air | O₂, CO₂, Ar, etc. (gases) | Nitrogen / N₂ (gas) | Gas |
| Brass | Zinc (solid) | Copper (solid) | Solid |
| Bronze | Tin (solid) | Copper (solid) | Solid |
| Copper sulfate solution | Copper sulfate (solid) | Water (liquid) | Liquid |
| Hydrogen in palladium | Hydrogen (gas) | Palladium (solid) | Solid |
Various everyday solutions: salt water and sugar water (solid-in-liquid), aerated drinks (gas-in-liquid), vinegar (liquid-in-liquid), air (gas-in-gas), and brass (solid-in-solid alloy)
A true solution has several characteristic properties that distinguish it from colloids and suspensions. These properties arise from the fact that the solute particles are of molecular or ionic size — less than 1 nm in diameter.
A solution has uniform composition throughout. Every small sample taken from any part of the solution has exactly the same proportions of solute and solvent. A sugar solution is equally sweet at the top, middle, and bottom of the glass.
The solute particles are of molecular or ionic size — less than 1 nanometre (1 nm = 10⁻⁹ m) in diameter. They are too small to be seen with the naked eye or even with an ordinary optical microscope.
A true solution is transparent — light passes straight through without being scattered. You can clearly see through a glass of salt water or copper sulfate solution (even though the latter is coloured, it is still transparent to light). Note: transparent ≠ colourless.
Because the solute particles are smaller than the wavelength of visible light (<1 nm), they cannot scatter light. When a laser or torch beam is passed through a true solution, the beam is not visible from the side. This absence of the Tyndall effect is a reliable test for a true solution.
The solute particles in a true solution do not settle at the bottom, even if the solution is left undisturbed for days, months, or years. This is because the particles are far too small to be affected by gravity — the random thermal motion of molecules keeps them dispersed.
The solute particles are far smaller than the pores in ordinary filter paper (which are ~10–100 μm). Therefore, filtration does not separate a true solution — both the solute and solvent pass through the filter paper. Separation requires evaporation, distillation, or other methods.
A solution is a stable, permanent mixture — the solute does not spontaneously separate from the solvent under normal conditions of temperature and pressure. Once formed, a solution remains homogeneous indefinitely (unlike a suspension, which settles out).
Even using an ultra-microscope (which can detect colloidal particles), the individual solute particles in a true solution cannot be detected, because they are smaller than the wavelength of visible light.
HITS-DF — Homogeneous · Invisible particles (under 1 nm) · Transparent · Stable · Does not settle · Filtration cannot separate it.
Since solute and solvent can each be a solid, liquid, or gas, there are theoretically nine possible types of solutions. The most important ones are listed below:
| Type | Example | Solute | Solvent |
|---|---|---|---|
| Gas in gas | Air | O₂, CO₂, Ar (gases) | N₂ (gas) |
| Liquid in gas | Humid air / Fog | Water vapour | Air (gas) |
| Solid in gas | Camphor vapour in air | Camphor (solid → vapour) | Air (gas) |
| Type | Example | Solute | Solvent |
|---|---|---|---|
| Gas in liquid | Aerated drinks (soda/lemonade) | CO₂ (gas) | Water (liquid) |
| Liquid in liquid | Vinegar, alcohol in water | Acetic acid / Ethanol (liquid) | Water (liquid) |
| Solid in liquid | Salt water, sugar water, copper sulfate solution | NaCl, sugar, CuSO₄ (solids) | Water (liquid) |
| Type | Example | Solute | Solvent |
|---|---|---|---|
| Gas in solid | Hydrogen in palladium | H₂ (gas) | Palladium (solid) |
| Liquid in solid | Amalgam (mercury in silver) | Mercury (liquid) | Silver (solid) |
| Solid in solid | Brass (zinc in copper), Bronze (tin in copper) | Zinc / Tin (solid) | Copper (solid) |
Alloys such as brass and bronze are solid solutions. They are formed by mixing metals in the molten (liquid) state. When cooled, the atoms of the solute metal distribute uniformly within the crystal lattice of the solvent metal — producing a solid solution with uniform composition. Physical methods cannot separate the components. For more, see → Alloys — Class 9 Science
Types of solutions classified by the state of solute and solvent: gaseous solutions (air), liquid solutions (salt water, aerated drinks), and solid solutions (brass alloy)
One of the most useful ways to classify solutions is based on the nature of the solvent — whether the solvent is water or something else.
An aqueous solution is one in which water is the solvent. The word "aqueous" comes from the Latin aqua, meaning water.
Water is called the "universal solvent" because it dissolves a very large number of substances — ionic compounds, polar molecules, gases, and many organic compounds.
Examples:
A non-aqueous solution is one in which the solvent is not water. These are used when a substance does not dissolve in water or when water would react with the solute.
Examples:
Water is a polar molecule — its oxygen atom carries a partial negative charge and its hydrogen atoms carry partial positive charges. This polarity allows water to attract and surround the ions of ionic compounds (like NaCl) and the molecules of polar covalent compounds (like sugar), effectively dissolving them. However, water cannot dissolve non-polar substances like oils and fats — for these, non-polar solvents like benzene or carbon tetrachloride are used. Despite this limitation, no other common solvent dissolves as wide a variety of substances as water.
Two solutions can both be "salt solutions" but differ greatly in their saltiness — one may be barely salty and another almost undrinkably salty. This difference is captured by the terms dilute and concentrated.
A solution that contains a relatively small amount of solute in a given amount of solvent. The solute particles are spread far apart from each other in the solvent.
Example: A pinch of salt in a full bucket of water — the solution is very slightly salty.
A solution that contains a relatively large amount of solute in a given amount of solvent. The solute particles are densely packed in the solvent.
Example: Three tablespoons of salt in a small glass of water — the solution is intensely salty.
"Dilute" and "concentrated" are not absolute terms — they simply indicate whether a solution has more or less solute compared to another solution. They do not tell you the exact amount of solute. For a precise, quantitative description of how much solute is present, we use concentration — expressed as mass by mass percentage (% m/m), mass by volume percentage (% m/v), or volume by volume percentage (% v/v).
For detailed formulae and solved numerical problems, see → Concentration of Solution — Class 9
A suspension of sand in water settles within minutes. A colloid like starch solution may eventually coagulate over days. But a true solution of salt in water remains perfectly uniform indefinitely. Why?
The answer lies in the size of the solute particles. When common salt (NaCl) dissolves in water, it breaks apart into individual sodium ions (Na⁺) and chloride ions (Cl⁻). These ions are of atomic/ionic size — approximately 0.1–0.3 nm in diameter. At this scale:
Imagine throwing a cricket ball and a grain of dust into a room with a strong fan. The cricket ball falls to the floor quickly. But the grain of dust gets swept up and remains airborne for a long time because air currents (analogous to the random thermal motion of water molecules) are strong enough to keep it suspended. A dissolved salt ion is even tinier than a grain of dust — the random thermal motion of water molecules is more than enough to keep it dispersed indefinitely.
Oral Rehydration Solution (ORS) is one of the most important solutions in medicine. It was formulated by Indian paediatrician Dilip Mahalanabis, who first developed and implemented ORS treatment for dehydration caused by diseases such as diarrhoea and cholera. His formulation revolutionised rehydration therapy and has saved millions of lives worldwide after the World Health Organization (WHO) popularised it.
Fig. 5.5 (NCERT Exploration): Saline solution (0.9% m/v NaCl in water) used in hospital drips — a real-life aqueous solution where exact concentration is critical for safety.
ORS is prepared by dissolving specific amounts of salt, sugar, and other components in a fixed volume of water. This concentration must be exactly right:
This example beautifully illustrates why the concentration of a solution matters. Changing the proportions gives you a solution, but not necessarily the right one for its intended purpose. The same principle applies to hospital saline drips (0.9% m/v NaCl), medicine dosages, fertiliser solutions for crops, and even the strength of disinfectant solutions.
A saline drip in hospitals is usually 0.9% m/v sodium chloride (common salt) in water — that means 0.9 g of salt in every 100 mL of solution. This concentration is "isotonic" — it matches the concentration of salts in human blood plasma. At this concentration, it is safe for injection into the bloodstream and effectively replaces lost fluids without damaging red blood cells.
A common point of confusion is the relationship between "solution" and "mixture". The key rule is:
Every solution is a mixture, but not every mixture is a solution.
| Feature | Mixture (General) | Solution (Specific type) |
|---|---|---|
| Definition | Any combination of two or more substances not chemically combined | A homogeneous mixture where solute is dissolved in solvent at molecular level |
| Composition | May be homogeneous or heterogeneous | Always homogeneous (uniform throughout) |
| Particle size | Varies — can be <1 nm, 1–1000 nm, or >1000 nm | Always < 1 nm |
| Settling | May or may not settle (depends on type) | Never settles — permanently stable |
| Tyndall effect | May or may not show (depends on particle size) | Does not show Tyndall effect |
| Examples | Salt water (solution), muddy water (suspension), milk (colloid), salad | Salt water, sugar water, vinegar, brass, air |
(a) Tincture of iodine: Solute = Iodine (solid), Solvent = Alcohol / Ethanol (liquid). Iodine is present in smaller quantity; alcohol is the dissolving medium. This is a non-aqueous solution.
(b) 70% ethanol in water (surgical spirit): Here, ethanol is 70% by volume and water is 30% by volume. Ethanol is present in larger quantity, so by strict convention ethanol is the solvent and water is the solute. However, in common pharmaceutical practice, this is described as "ethanol in water" because water is the biologically familiar medium. Both answers are acceptable; the key is to state the reason.
(c) Copper sulfate solution: Solute = Copper sulfate / CuSO₄ (solid, blue crystals), Solvent = Water (liquid). This is an aqueous solution — the intense blue colour comes from Cu²⁺ ions uniformly dissolved in water.
(d) Fizzy lemonade: Solutes = CO₂ (gas), citric acid (solid), sugar (solid); Solvent = Water (liquid). This is an aqueous solution with multiple solutes.
(a) Vinegar — Aqueous. Solvent is water; acetic acid (5% v/v) is dissolved in water.
(b) Tincture of iodine — Non-aqueous. Solvent is alcohol (ethanol), not water. Iodine is dissolved in ethanol.
(c) Aerated drink — Aqueous. Solvent is water; CO₂ and flavouring agents are dissolved in water.
(d) Perfume — Non-aqueous. Solvent is usually ethanol (alcohol); fragrant compounds are dissolved in alcohol, not water.
(e) Salt water — Aqueous. Solvent is water; sodium chloride is dissolved in water.
Liquid A — Salt solution: No Tyndall effect. Salt solution is a true solution — Na⁺ and Cl⁻ ions are smaller than 1 nm and cannot scatter visible light. This confirms it is a true solution.
Liquid B — Starch solution: Tyndall effect observed. Starch particles (1–100 nm) are in the colloidal range and can scatter the laser beam. Starch solution is a colloid, not a true solution — it only appears to be a solution visually.
Liquid C — Muddy water: Tyndall effect observed (and particles may be directly visible). Clay particles are >1000 nm; they scatter light strongly. Muddy water is a suspension — the beam path is very clearly visible from the side. The mixture will also settle on standing.
This example illustrates how the Tyndall effect is a reliable test to distinguish a true solution (no scattering) from a colloid or suspension (scattering visible). See → Tyndall Effect
Definition: A solution is a homogeneous mixture of two or more substances in which a solute (substance dissolved) is completely mixed with a solvent (dissolving substance) at the molecular level. The solute particles are less than 1 nm in size and are uniformly distributed throughout the solvent.
Four properties of a true solution:
A dilute solution contains a relatively small amount of solute dissolved in a given amount of solvent. A concentrated solution contains a relatively large amount of solute dissolved in a given amount of solvent.
These are NOT absolute terms. They are relative — a solution can only be called "dilute" or "concentrated" in comparison to another solution of the same solute. For example, a 5% salt solution is dilute compared to a 20% salt solution, but concentrated compared to a 1% salt solution. To express the exact amount of solute present, we use quantitative measures of concentration such as percentage by mass (% m/m), percentage by volume (% m/v or % v/v), etc. See → Concentration of Solution
In a true solution, solute particles are of ionic or molecular size — less than 1 nm. These particles are too small to scatter visible light, so light passes straight through the solution, making it transparent. They are also too small to be affected by gravity, so random thermal (Brownian) motion of the solvent molecules keeps them perpetually dispersed — the solution never settles. Additionally, solvent molecules form stable hydration shells around solute particles, further preventing aggregation.
In a suspension, particles are large — more than 1000 nm. These large particles scatter light, making the suspension turbid (not transparent). They are also heavy enough to be pulled down by gravity, so they settle over time. The Tyndall effect (light scattering) is clearly visible in a suspension but absent in a true solution.
Yes, it would still be a solution — as long as the extra salt dissolves fully in the water (i.e., the solubility limit is not exceeded), the resulting liquid is a homogeneous salt-sugar-water solution. It would still be transparent, uniform throughout, and would not settle.
No, it would not serve the same medical purpose. ORS works because its concentration matches that of the electrolytes in blood plasma (it is "isotonic"). If you double the salt concentration, the solution becomes "hypertonic" — more concentrated than blood plasma. When administered, osmosis would actually draw water out of the body's cells and bloodstream into the gut, worsening dehydration rather than treating it. This is why the exact concentration of ORS is medically critical. This example shows that "a solution" and "the right solution for a purpose" are two different things — concentration matters enormously in practical applications.
| Substance | Type | Reason |
|---|---|---|
| (a) Salt water | Solution (S) | Na⁺ and Cl⁻ ions dissolved at ionic size (<1 nm); transparent; no Tyndall effect; stable. |
| (b) Milk | Colloid (C) | Fat droplets 1–1000 nm; appears uniform but shows Tyndall effect; does not settle. |
| (c) Muddy water | Suspension (Su) | Clay particles >1000 nm; particles visible; shows Tyndall effect; settles on standing. |
| (d) Copper sulfate solution | Solution (S) | Cu²⁺ and SO₄²⁻ ions in water; particle size <1 nm; transparent (blue); no Tyndall effect; stable. |
| (e) Fog | Colloid (C) | Tiny water droplets (1–1000 nm) dispersed in air; Tyndall effect visible; does not settle quickly. |
| (f) Sand in water | Suspension (Su) | Sand particles >1000 nm; visible to eye; settles rapidly on standing; shows Tyndall effect. |
| (g) Air | Solution (S) | Gas molecules (<1 nm) mixed uniformly; no Tyndall effect; stable homogeneous gaseous solution. |
(a) True. A solution is by definition a homogeneous mixture — the solute is uniformly distributed throughout the solvent.
(b) False. A true solution cannot be separated by ordinary filtration because the solute particles (<1 nm) are far smaller than the pores of filter paper. Correction: A solution cannot be separated by ordinary filtration; evaporation or distillation must be used instead.
(c) False. Tincture of iodine is a non-aqueous solution — iodine is dissolved in alcohol (ethanol), not in water. Correction: Tincture of iodine is a non-aqueous solution (solvent = ethanol/alcohol).
(d) False. A true solution does not settle on standing — the solute particles are too small to be pulled down by gravity. Correction: A true solution remains stable and does not settle even when kept undisturbed for a very long time.
(e) True. Air is a homogeneous gaseous solution of nitrogen (solvent), oxygen, carbon dioxide, argon, and other gases (solutes).
(a) Solid in liquid: Copper sulfate solution — Solute: copper sulfate (CuSO₄, solid); Solvent: water (liquid).
(b) Gas in liquid: Aerated drink (soda) — Solute: carbon dioxide, CO₂ (gas); Solvent: water (liquid).
(c) Liquid in liquid: Vinegar — Solute: acetic acid (liquid); Solvent: water (liquid).
(d) Solid in solid: Brass — Solute: zinc (solid); Solvent: copper (solid). Brass is an alloy — a homogeneous solid solution. See → Alloys
(e) Gas in gas: Air — Solute: oxygen, carbon dioxide, argon, etc. (gases); Solvent: nitrogen (gas), which is present in the largest proportion (~78%).